Virutex PEB200 portable edge bander, now in an edge-banding pack with a stationary table, roll-holder and manual stripe cutter. Use your edge bander in a working station comfortable, or remove the three screws holding it in place to use it as a hand-held tool.
With Virutex PEB200 edge-bander, you can fit PVC, ABS, melamine, laminate... stripes on both straight and curved edges of different heights. The PEB200 is especially practical to small manufacturers and is very easy to use.
Easily adjustable on height and thickness – you will be able to work with different strips and boards after a quick adjustment. In just 10 minutes, with the hot-glue deposit already warm, your edge-bander will be ready to use.
Technical Specifications for the Virutex PEB200TRC Hand-Held Stationary / Portable Edgebander:
- Rated power (W): 830
- Net weight of the portable edge bander(Kg): 9.2
- Power supply cord length (m): 5
- Glue temperature (ºC): 170
- Glue capacity (cc): 230
- Glue heating time (min): 5 - 10
- Strip height (mm): 10 - 62
- Strip thickness (mm): 0.4 - 3
- Edgebanding speed (m/min): 3.6
- Minimum curve radius (mm): 50
- Minimum curve radius with auxiliary roller (ref. 5046764( (mm): 15
- Net weight of the stationary work table (Kg): 17
- Measurements of the stationary work table (mm): 860 x 350
- Working surface of the stationary table (mm): 800
- Working height of the stationary table (mm): 195
Standard Accessories for the Virutex PEB200TRC Edgebander with Stationary Table - Included:
- PEB200 Hand-Held Edge Bander
- 250 g bag of hot-melt glue
- Wrench
- MEB250 Work station
- Auxiliar pressure roller
- Stripe roll-holder
- Manual stripe cutter
- Position guide
- Extensible posterior position guide
- Detachable pressure roll for posterior position guide
Compatible Accessories for the Virutex PEB200TRC Edgebander - Not Included:
Read moreShow less
